|
|
|
|
|
|
|
|
|
|
|
|
|
|
QUICKLY SET NUTS: 1/4" magnetic hex shank nut setter set can be used with an impact driver or common power drills TIME-SAVING MAGNETIC DESIGN: Powerful magnetic design picks up nuts and bolts so you can position them quickly CHROME-VANADIUM STEEL: Heavy duty construction
|
For use with Copper & Stainless Steel ProPress Fittings Designed in conjunction with the ProPress System fittings, ensuring total system compatibility. Compatible only with RIDGID Standard Series pressing tools 330, 320, CT400
|
40% lighter and 33% smaller than Standard Series Jaws enabling them to fit into tight spaces. Designed in conjunction with the ProPress system fittings, ensuring total system compatibility. Compatible only with RIDGID Compact Series pressing tools (100-B, RP 200-B, RP 210-B).
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PLEASE NOTE: YOU MUST ORDER BITS...THIS IS THE TOOL ONLY!!!!
Powerful, Light Weight Design: Delivers 2.4 ft-lbs of impact energy at only 5.8 lbs.
Mechanical Clutch: Protects tool when bit binds up Powerful 7.0 Amp Motor: Delivers 0-1,500 RPM and 0-5,625 BPM 3-Mode Operation: Rotary hammer, hammer only and rotation only for maximum versatility Variable Position Chisel Stop: Allows Steel to be adjusted for work in any orientation
|
Rely on this fume extractor to keep any smoke out of your working area. Lightweight and portable, you can use this fume extractor for both field and bench work. This fume extractor contains 9 filtering combinations which may be used with TIG, soldering and light MIG applications. Ace Welding Fume Extractor units contain a compact, easy to use design. Rely on the magnetic support base for hand-free operation, saving you time and increasing welding productivity. The HEPA filter features excellent Hexavalent Chromium Control. A built in spark trap is made for fire safety and protection from flame.
|
Shaft Extensions easily attach to the core bit and allow for a deeper drilling capacity.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
.27 caliber short, 6.8/11 M10 strips
Power Levels:
Yellow = Medium Duty
Red = Heavy Duty
Black = Extra Heavy Duty
|
• Reduces musculoskeletal strain associated with operating rotary hammer drills overhead
• Reduces risk of job-site falls by eliminating the need for ladders for overhead drilling
• Integrated dust extraction system captures dangerous airborne silica dust (vacuum sold separately)
• Reaches 12’ ceilings
• Compatible with scissor lifts for higher ceilings
• Holds a wide variety of rotary hammer drills
• Operates both AC and cordless drills
• Chain lift mechanism for simplicity, durability, long life and low maintenance
• Safety winch/clutch design simplifies & speeds operation
• Manufactured in USA by Telpro Inc. with a 40+ year history in the construction equipment industry
• One year limited warranty with U.S. parts, service and customer support
• Ships compactly; easily portable
|
Pump used to transfer glycol in testing and filling of lines
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Replacement Brushes for use with M12 HAMMERVAC 2306-20, 2306-22 and NEW 2712-DE and 2715-DE
|
M12 Force Logic Press Jaws are manufactured for the highest standards of press quality and durability in the industry. Designed for easy opening with one thumb, these jaws when used with the M12 Force Logic Press Tools represent a one handed pressing solution for up to 1 1/4 in. pipe. M12 Press Jaws will deliver quality press connections on all major fitting brands including Viega ProPress Systems, Elkhart Apollo Xpress and Grinnel G-Press copper systems. - Easy opening jaw designed for one handed use
- Designed for use with all major fitting manufacturers including Viega ProPress systems, Elkhart Apollo Xpress and Grinnel G-press copper systems
- Compatible with M12 Force Logic press tool
|
| Trak-It® C5 |  | Trak-It® Fasteners and Blue Nailer-Gas Fuel Cells are designed to be used with the Powers Trak-It® Tool and can also be installed with the ITW Ramset® TrakFast® tool. Ten fasteners are collated on each patented, plastic top hat-style strip. Use for light duty static applications such as drywall track to concrete, block or steel, lath to concrete or block, furring strips to concrete or block, and plywood to concrete or block base materials. The fuel cell, with its unique right angle metering valve, contains enough gas to install up to 1200 fasteners. Each package contains 1000 fasteners and 1 fuel cell. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Please select this to put in your cart if there are no items that are in this catalog and you need to list them in the comments box.
|
- 2-1/2” square column (mast) with black oxidized finish
- 6” wheels for easy mobility
- Dual switch/outlet control panel with amp meter
- 4 leveling screws on the base
Benefits: - Slide handle allows for drilling in tight areas
- Great for the general contractor or pro contractor
- Ceiling jack helps keep the rig in place as a backup for anchoring or vacuuming the base down (used with a brace piece - 2 x 4 or other material)
|
Steel capacity: 14 gauge
Stainless capacity: 16 gauge
Length: 17.25 inches
Weight: 5.9 pounds
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Powerful Hammer Mechanism: Delivers 1.8 ft-lbs of impact energy; Mechanical Clutch: Protects tool when bit binds up; AVS - Anti Vibration System: Delivers maximum comfort by minimizing vibration 3-Mode Operation: Rotary hammer, hammer only and rotation only for maximum versatility Variable Position Chisel Stop: Allows Steel to be adjusted for work in any orientation Impact Energy: 1.8 ft-lbs; RPM: 0-1,400, BPM: 0-4,800; Max Capacity: 7/8"; Thin Wall Core Bit Capacity: 2-1/8"; Chipping: Yes; Clutch: Yes
|
Includes Hammervac dedicated dust extractor, 2 Redlithium XC 4.0 high-capacity batteries, an M12/M18 charger, HEPA filter, depth rod, and side handle Fuel M18 batteries and charger can swap out as needed to keep you powered for hours at a time Milwaukee rotary hammer generates 1.7 foot-pounds of energy Milwaukee's Powerstate motor runs at speeds of up to 4,900 BPM and 1,400 RPM Redlink Plus system prevents overheating and overloads for safer work AVS reduces vibration-related strain Hammervac extractor removes dust particles from the air Depth rod provides accuracy for drilling to specific depths Side handle rotates for comfortable working angles
|
Features & Applications Features - High runtime flexibility thanks to two compatible 36V batteries – Standard and Industrial, plus fast charging time
- Extremely powerful rotary hammer, designed for serial anchor drilling
- Very convenient and lightweight for superior handling
- Active Vibration Reduction (AVR) system designed to protect the user from hand-arm vibration
- Forward / reverse switch with middle locked position
Applications - Drilling and hammer drilling in concrete and masonry
- Occasional drilling in wood and steel with optional quick-release chuck
- Light chiseling
- Screwdriving using the special bit holder with TE-C (SDS Plus) connection end
- Drilling in concrete in clean areas using the DRS-6-A (02) integrated dust removal system
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Threaded Rod Cutter (DCS350) is capable of quickly and cleanly cutting a range of threaded rod sizes including 1/4", 3/8" and 1/2" mild steel coarse thread rods and ¼”and 3/8” stainless steel coarse thread rods. The four sided, rotatable, cutting die allows you to cut the three different sizes of threaded rod with the same tool just by rotating the cutting dies to the size you want to cut. The unit doesn't create chips or sparks while cutting, providing a burr-free cut to easily thread on fasteners without having to clean the threads. The Threaded Rod Cutter is part of the DEWALT Perform & Protect(tm) line of power tools, which is designed to provide a high level of one or more of the following: control, dust containment, or low vibration, without sacrificing performance. The Threaded Rod Cutter increases control by eliminating fast moving cutting blades or wheels which can bind up when cutting or trimming threaded rod. The speed of the tool allows for efficiencies and achieves up to 350 3/8" cuts on one battery charge. The unit includes a bright LED work light, a forward/reverse/lock off switch, and a hang hook.
|
2-Hinge Design requires less clearance to fit around pipeUp to 10% lighter than the leading competitorDurable Steel Rings and Adapters provide outstanding lifeCompatible with M18 Force Logic Press Tool
|
Features - First-class performance-to-weight ratio and very compact design
- High battery capacity – drills more holes per battery charge than other cordless rotary hammers in this class
- Specially designed hammering mechanism for superior drilling performance up to 1/2"
- Virtually dustless drilling using the DRS-4-A dust removal system
- Cordless tool with corded tool performance
Applications - Repetitive drilling in all directions in concrete and masonry; recommended for diameters up to 1/2"
- Drilling in concrete in clean areas using the integrated dust removal system (DRS-4-A)
- Occasional drilling in wood, steel and plastics using the special chuck adapter
- Screwdriving using the special bit holder with SDS plus connection end
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Drives up to 10 times more screws than standard screwdriver bits Universal 1/4-Inch hex shank for use with any magnetic bit holder No.2 Phillips drywall bits
|
Washer - used with 1-1/4"-7 Core Bits to allow easy bit removal. Increases productivity: Minimizes the effect of friction lock with Shear Pin and Clutch Diamond Coring Motors
Long life: Copper construction resists fatigue
|
Couplers made of brass Plugs made of case hardened steel plated to resist rust 250-degree max temperature 300 PSI max inlet pressure
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Shock-resistant tool steel for maximum durability Extra-strength magnet for superior bit retention Heat-treated; resists breakage and wear 1/2" Diameter, 2 7/8" long
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
If you want to use dry diamond or flat, cut-off wheels with your grinder, this handy item provides the extra support and surface material that you need. The solid-metal backing flange can be used with 4-1/2-inch grinders that have a 5/8-by-11-inch arbor.
|
Couplers made of brass Plugs made of case hardened steel plated to resist rust 250-degree max temperature 300 PSI max inlet pressure
|
Milwaukee Side Handle Assembly for Hammer Drills
|
|
|
