|
|
|
|
|
|
Close Quarter Tubing Cutters
|
|
|
Rollers include grooves for close-to-flare cuts on model 101 Strong, lightweight slide and wheel housing, and large knurled feed screw knob give easy control of cutting pressure for clean cuts.
|
|
|
|
|
|
|
|
|
|
Screw Feed Tubing Cutter
|
|
|
Clean, square cuts are easily made on copper, brass, aluminum and thin-wall steel.
X-CEL® Knob cuts tubing more quickly and easily with a larger, more ergonomic designs. Models 10, 15 and 20 feature a convenient fold-away reamer.
|
|
|
|
|
|
|
|
|
|
Replacement Cutter Wheels
|
|
|
All cutter wheels are made from high shock-resistant tool steel. By using this higher quality raw material, cutter wheels can be made thinner and can therefore cut pipe more easily and leave less burr. Also, because of their higher quality, cutter wheels can be heat-treated for the perfect balance between hardness and toughness to make cutter wheels resist breakage and last longer.
|
|
|
|
|
|
|
|
|
|
Hinged Pipe Cutter
|
|
|
Designed for rapid cutting of steel pipe Operates with minimal cutter rotation as necessary for tight quarters Can be used as tubing cutters Clean cut with limited crimping or bending
|
|
|
|
|
|
|
|
|
|
Auto Cutters (Ratcheting) (Non-Stock)
|
|
|
Everyone needs a handy cutter (or two) like Reed’s C Cutter. This easy-to-grip cutter easily snaps on to copper tubing for a quick, clean cut. Just turn the cutter in the direction of the arrow and the cut will be complete in seconds. Compact c-shape means no handle swing space is required. The spring-loaded cutter wheel self-feeds on Type K, L, and M copper and CTS CPVC with consistent pressure as the tool is turned around the tubing. Each cutter fits just one popular size of copper tubing.
|
|
|
|
|
|
|
|
|
|
Internal Cast Iron Cutter (Non Stock)
|
|
|
Designed to eliminate the difficulty plumbers have in setting toilet bowls, urinals and similar fixtures due to the shortness of the closet horn. Cast Iron Pipes from the inside out! 3" and 4" sizes available
|
|
|
|
|
|
|
|
|
|
PVC Ratchet Tube Cutter
|
|
|
Ratchet Shears are ideal for cutting PVC, PE, PP, PEX, and ABS pipe and tubing.Smoothest ratchet action for easiest cuts.CPVC is no problem.Replace or resharpen blades for longer tool life and faster cuts.Capacity of small cutters: 1 1/4"Capacity of large cutters: 2"
|
|
|
|
|
|
|
|
|
|
Hydraulic Pipe Cutter (2 1/2"-8") (W/ Foot Pump)
|
|
|
Powered by a model 700 Power Drive (choose if needed in dropdown). Power Drive RPM – 26-30 (no load).
258 cuts up to 8"
Please order depending on what sizes you need
Square cut 21ft (6m) or nipple lengths of pipe without effort. Easily cuts by displacing instead of removing pipe material. No abrasive dust, dangerous sparks, or open flame. Quickly cuts steel pipe with minimal burr. Great for cutting pipe for groove joining. Heavy-duty design is perfect for field or shop use. Adaptable for beveling.
|
|
|
|
|
|
|
|
|
|
Cutting Torch
|
|
|
Process is straight cutting Industrial applications include heavy and medium duty For use with any fuel gas that is 5 PSIG and above Cut capacity is 1/8 inch to 5 inch
|
|
|
|
|
|
|
|
|
|
DeWalt 20V Threaded Rod Cutter (Non-Stock)
|
|
|
The Threaded Rod Cutter (DCS350) is capable of quickly and cleanly cutting a range of threaded rod sizes including 1/4", 3/8" and 1/2" mild steel coarse thread rods and ¼”and 3/8” stainless steel coarse thread rods. The four sided, rotatable, cutting die allows you to cut the three different sizes of threaded rod with the same tool just by rotating the cutting dies to the size you want to cut. The unit doesn't create chips or sparks while cutting, providing a burr-free cut to easily thread on fasteners without having to clean the threads. The Threaded Rod Cutter is part of the DEWALT Perform & Protect(tm) line of power tools, which is designed to provide a high level of one or more of the following: control, dust containment, or low vibration, without sacrificing performance. The Threaded Rod Cutter increases control by eliminating fast moving cutting blades or wheels which can bind up when cutting or trimming threaded rod. The speed of the tool allows for efficiencies and achieves up to 350 3/8" cuts on one battery charge. The unit includes a bright LED work light, a forward/reverse/lock off switch, and a hang hook.
|
|
|
|
