|
|
|
|
|
|
12R Die Head
|
|
|
12-R die head is a threading accessory. It comes with selected dies and is set at the factory. It weighs 4.43 lbs. - Alloy right hand
- Die heads complete come with selected dies
- Threading accessory
|
|
|
|
|
|
|
|
|
|
Semi-Automatic Die Head
|
|
|
Through-head oiling design simplifies operationLever lock-down and release mechanism makes changing dies easyCompatible with select RIDGID threading machinesTool Type: SAE Die HeadApplicable Materials: Brass, Bronze, Copper, Iron, Plastic, Steel, ZincPipe Capacity: 1/2" to 2"
|
|
|
|
|
|
|
|
|
|
Ridgid Bench Chain Vice (Non-stock item)
|
|
|
Two models available for plastic pipe. Toothless jaws are neoprene-coated to prevent scoring of pipe. Holds 1/8 in. to 2-1/2 in. pipe. Posts for pipe bending. Full lifetime warranty against material defect & workmanship. - Top screw bench chain vise
- The heavy duty cast iron base has jaws especially designed for gripping plastic coated pipe/conduit
- These toothless jaws are neoprene coated to prevent scoring of the pipe surface
- The operation handle is firmly anchored to the base of the vice which also features a pipe rest and bender
- Pipe capacity range 1/8 in. to 2 1/2 in.
- Crank handle is anchored to base
- Full lifetime warranty against material defects and workmanship
|
|
|
|
|
|
|
|
|
|
Lox-8 Thread Sealant 3.5oz jar (NON-STOCK)
|
|
|
LOX-8 Thread Sealant is used in applications requiring an oxygen-safe, waterproof (or dry) thread sealant that can withstand both high extreme temperatures and high pressure. LOX-8 is a great lubricant for O-rings and gaskets in oxygen equipment.
LOX-8 is available in both grease and paste, specifically formulated for wet conditions, but can also be used in dry conditions. (For dry conditions, you can also use FORMULA-8 oxygen-safe thread sealant.) Both are high-density, inert thread sealants and lubricants expressly designed for severe high-pressure applications. LOX-8 remains stable up to 450°F. It is nonflammable and nontoxic.
The excellent lubricity of LOX-8 results from our formulation of jelled oil of polychlorotrifluoroethylene (PCTFE), containing a high percentage of .5 to .05 micron polytetrafluoroethylene (PTFE).
LOX-8 pipe joint thread sealant is highly recommended where oxygen, harsh chemicals such as chlorine or powerful oxidizers are present.
Use LOX-8 in
• off-shore rigging, as an anti-galling grease
• oxygen and chlorine systems
• cryogenics
• diving gear
• nitrous oxide systems
• medical equipment
• pulp and paper processing
• waste-water processing
• welding
LOX-8 is odorless, noncorrosive and waterproof. It is non-migrating, remaining where it is applied. LOX-8 is ideal where repetitive assembly and disassembly are required.
LOX-8 Grease has been used very successfully as an anti-galling agent in stainless steel applications
|
|
|
|
|
|
|
|
|
|
Tuf-Glide Thread Sealant (1qt.)
|
|
|
Tuf-Glide Thread Sealant with PTFE (Teflon®). Compare to Loctite.FGG/BM® System Compatible (Flowguard Gold®, Blazemaster® and Corzan® pipe and fittings)Easy to apply, eliminates leaks, sticks to oily pipe, less dripping.Tuf-Glide may be used on steel, aluminum, brass, copper, iron, reinforced fiberglass, CPVC, PVC and ABS threaded connections. 10,000 psi, up to 500° F. No VOC's.Made in USA. LEED Compliant Thread Sealant.
|
|
|
|
|
|
|
|
|
|
12R Ratchet and Handle Only (Hand Threader)
|
|
|
Ratchet knob indicates forward and reverse. Die heads snap in from both sides and lock in place. Ratchet & handle only Ratchet knob indicates forward and reverse Die heads snap in from both sides and lock in place Works with Die Head Series 12-R
|
|
|
|
|
|
|
|
|
|
Semi Auto Opening Die Head (1-2")
|
|
|
84532 Diehead, Quick Set 1-2" 1/2" - 2" Nominal Pipe Size Semi-automatic can be quickly adjusted from size to size with manual release. Used with universale dies Can be quickly adjusted from size to size with manual release Right handed thread direction
|
|
|
|
|
|
|
|
|
|
Oiler with Chip Tray, Reservoir Bucket
|
|
|
Hand Held Oiler with 50-percent more oil per stroke than other hand-held oilers. Its features include an ergonomic 2-finger trigger design that reduces user fatigue, and a die cast, heavy-duty body with swivel nozzle with no exposed parts for longer life. It also features a patent pending fastener less twist and lock drip pan that easily locks in place.
Oil ordered separately.
|
|
|
|
|
|
|
|
|
|
Combo Roll Groover
|
|
|
Combo Roll Groovers are 2-in-1 service tools that yield cost savings of time and money by allowing a complete change in minutes from power machine operation to manual work or back. They are operated either manually or under power. RGCOMBO2 forms standard rolled grooves in steel, stainless steel, and aluminum pipe from 1 1/4” to 6”. The formed grooves comply with the specifications required for mechanical coupling systems. The only adjustment required is for the depth
|
|
|
|
|
|
|
|
|
|
Ridgid 975 Combo Roll Groover 2"-6" for 300 Machine
|
|
|
The Model 975 Combo Roll Groover is two tools in one. Like other RIDGID® roll groovers, the 975 mounts on the RIDGID 300 Power Drive for machine-powered roll grooving jobs. It also designed to manually roll groove in-place pipe.
Features - Auto Tracking & Depth Setting Gauge Means Easier Use - The 975 Combo Groover includes new, patented auto tracking technology for significantly easier grooving. Whether you're doing machine-powered or manual grooving, the AutoTracking gauge keeps the pipe automatically engaged to the groover throughout the grooving process. The 975 also includes a permanently depth setting gauge for quicker, repeatable set-up.
- Less Hand Force Required - When manually roll grooving, the 975's 55% higher gear reduction means less hand force required versus competitive manual roll groovers. This is especially helpful for over-head roll grooving.
- Durability And Portability - A tough, ductile iron construction means the 975 can absorb jobsite abuse and provide accurate grooves time after time. A cast-in handle makes the 975 easily portable to and from the jobsite.
Specifications | Capacity | 1 ¼” – 6” Schedule 10 and Schedule 40 steel, aluminum, and PVC pipe. | | 1 1/4" – 6" Schedule 10, 1 1/4" – 2" Schedule 40 stainless steel pipe, 11/2" – 3" Schedule 80 PVC pipe. | | With roll change, 2" – 8" copper tube (Type K, L, M, and DWV). | | Depth Adjustment | Adjusting screw and integral, index depth gauge. | | Actuation | Feed screw with 1/2" ratchet wrench (included), or any 15/16" hex wrench. | | Power Drive Mounting | RIDGID 300 Power Drive 38/57 RPM (reverse direction only). |
|
|
|
|
