|
|
|
|
|
|
Bearing Cone Heater
|
|
|
Cone style bearing heaters (non-induction)
Flexible manufacturing repairs for press-fit applications. Lower cost than
larger induction heaters. Lightweight and portable, easy to move around a
shop or factory floor. No special wiring or set up, uses standard wall plugs
120 V / 15 A. Start and stop with a switch. One cone bearing heater fulfills a
range of bearing sizes. Temperature preset on -CB versions, 250° F
|
|
|
|
|
|
|
|
|
|
Spindle/Split Bearing Puller
|
|
|
Advanced hydraulic spindle, 100 kNThe TMHS series is an advanced hydraulic spindle with an integrated hydraulic pump for force generation. The spindle contains an integrated cylinder filled with hydraulic fluid. By pumping the hydraulic fluid using the spindle's handle, the piston will advance. The piston will automatically retract by releasing the pressure relief valve. They are equipped with a safety valve, which prevents overloading of the spindle and the puller it is used with.- Nose piece with a spring-loaded centre point, allowing the puller to be easily centered on the shaft in case a centre point is available
- Quick to operate
- Comes with a range extension pieces
|
|
|
|
|
|
|
|
|
|
Pallet Jack w/Scale
|
|
|
✓ 5000 lb. weight capacity
✓ Intuitive keypad control system for easy operation
✓ Durable powder coat finish
Determine skid and pallet weights quickly and accurately with this Global Industrial™ Pallet Jack Scale Truck. Operators can use the scale pallet jack at their dock to quickly verify inbound and outbound freight. This versatile scale pallet jack combines all the features of a pallet truck with a portable Mettler Toledo HAWK scale and sensor. Its integrated RS-232 port also allows sending data to serial devices and it's made to display up to 5000 lb. capacity in 1 lb. increments (or kilograms/grams).
Backlit LCD display with 1"H characters4 color-coded, tactile-feel keys (ZERO, TARE, FUNCTION, PRINT)1-Year Limited Warranty
|
|
|
|
|
|
|
|
|
|
Hydraulic Puller
|
|
|
The 729124 pump is suitable for use with Hydraulic nuts (up to HMV 54E) and for mounting and dismounting bearings or components where a maximum pressure of 100 MPa (14 500 psi) is required. Alternatively, it can be used with other common hydraulic applications where hydraulic pressure up to 100 MPa (14 500 psi) is permissible. The handy compact pump is supplied in a quality carrying case making it ideal for using both in the workshop and on site. It comes with a mounted 1 500 mm (59 in) long pressure hose and quick connect coupling. It is provided with an analogue pressure gauge. The pump is pre-filled with Mounting fluid LHMF 300. A mating quick connect nipple and an extra litre of mounting fluid are supplied in the tool case as well. The pump is also suitable for LHDF 900 Dismounting fluid. Features - Compact design
- Ready to use; fitted with a pressure gauge, hose and quick connection coupling
- Ideal for workshop or on-site use
- Oil container capacity 250 cm³ (15 in³) pre-filled with LHMF 300
- Packed in a sturdy protective case
benefits This pump can be applied in: - Situations where Hydraulic nuts smaller than or equal to HMV 54E are used to mount bearings on a shaft
- Oil injection applications where the maximum needed pressure is 100 MPa (14 500 psi)
- General hydraulics where pressures, up to 100 MPa (14 500 psi are allowed
|
|
|
|
|
|
|
|
|
|
TKSA-11 Laser Alignment Tool
|
|
|
New technology makes shaft alignment easier and more affordableThe SKF TKSA 11 is an innovative shaft alignment tool that uses smartphones and tablets and intuitively guides the user through the shaft alignment process.. With a focus on the core alignment tasks, the TKSA 11 is designed to be a very easy-to-use instrument is especially suitable for alignment learners and compact applications. The SKF TKSA 11 is the first instrument on the market that uses inductive proximity sensors, enabling accurate and reliable shaft alignment to be affordable for every budget. - Live view of the instrument and motor position makes the measurement and horizontal alignment intuitive and easy
- The TKSA 11 app offers a fully functional demonstration mode allowing the complete alignment process to be experienced without the need to purchase the TKSA 11
- The TKSA 11 is designed to give a fast return on its investment and is also affordable for almost every budget
- Mobile devices allow high resolution graphics, intuitive usage, automatic software updates and display unit choice
- By using inductive proximity sensors, the measurement is no longer affected by bright sunlight, the influence of backlash is reduced and the instrument becomes more robust. All enabling the TKSA 11 to deliver accurate and reliable shaft alignments
- Automatic alignment reports give a complete overview of the alignment process and results. Reports can easily be shared via email or cloud services
- The TKSA 11 is supplied in a sturdy SKF carrying case
- Extensive range of accessories is available.
|
|
|
|
|
|
|
|
|
|
Horizontal High Pressure Tank
|
|
|
Horizontal High Pressure Recovery Tank
|
|
|
|
|
|
|
|
|
|
Goodway Tube Cleaner (Foot Pedal)
|
|
|
The impressive RAM-4X Tube Cleaner is equipped with a full 1 HP (0.75 kW) drive motor. It uses a cleaning tool mounted to the tip of a heavy-duty flexible shaft to remove hard deposits and scale from tubes/pipes 1" (25.4mm) I.D. and up. Flexible shafts and accessories are available for either WET or DRY applications. For wet applications, the unit feeds water through the casing to the cleaning tool, flushing out deposits as they are loosened. For dry applications, the GTC-DPA Dry Pickup Attachment and a simultaneous vacuum are used to remove loosened deposits.
|
|
|
|
|
|
|
|
|
|
1000 lbs Recovery Tank
|
|
|
- APPLICATIONS: This 1000LB 400 PSI Refrigerant Recovery Cylinder Tank with Forklift Footer will meet all your refrigerant recovery needs and can also be used to REFILL smaller refrigerant recovery tanks
- EQUIPPED WITH MULTIVALVES (features a Liquid valve and Vapor valve); it has a 3/4 inch NPT opening that accepts 80 percent fill float switch shut-off device; float switch device not included
|
|
|
|
|
|
|
|
|
|
TKSA-41 Laser Alignment Tool
|
|
|
The laser shaft alignment system with enhanced measuring and reportingThe TKSA 41 is an advanced laser alignment solution for achieving accurate shaft alignments. With two wireless measurement units, large sized detectors and powerful lasers, the instrument performs precise measurements in even the most challenging conditions. The ergonomic display unit with intuitive touch screen navigation makes your alignments fast and easy, whilst innovative features, like the “free measurement”, increase the alignment performance. With the focus on improving alignment practices, the SKF Shaft Alignment Tool, TKSA 41, is one of the industry’s best value alignment solutions. - Wireless communication improves instrument handling and allows alignment of difficult to reach applications from a safe position.
- Free measurement allows alignment measurements to start at any angle and finish with an angular sweep of just 90°.
- Automatic measurement enables hands-free measurements by detecting the head position and taking a measurement when the heads are rotated into the right position.
- Automatic reports are generated after each alignment. The reports can be customised with notes and pictures from the built-in camera for the most comprehensive overview. All reports can be exported as pdf files.
- Live view supports intuitive measurements and facilitates horizontal and vertical alignments.
- Machine library gives an overview of all machines and alignment reports.
- QR codes can be used to further simplify machine identification and improve the alignment workflow.
- The TKSA 41 is supplied in a sturdy SKF carrying case
- Extensive range of accessories is available.
|
|
|
|
|
|
|
|
|
|
TKSA-51 Laser Alignment Tool
|
|
|
Wireless laser shaft alignment system for tablets and smartphones (iOS + Android)The TKSA 51 provides high measurement flexibility and performance, suitable for entry-level to expert alignment jobs. Designed to work with the SKF shaft alignment apps on a tablet or smart phone, this intuitive tool is easy to use and requires no special training. The included accessories enable use of the TKSA 51 for a wide range of alignment applications with horizontal and vertical shafts, such as motors, drives, fans, pumps, gearboxes and more. The apps include tutorial videos to show operators how to perform accurate measurements.- Measurements can start at any angle and require a total minimal rotation of only 40 degrees
- Alignment reports are generated automatically and can be customised
- Reports can be exported as PDF files and shared with other mobile apps
- A range of components are included, such as magnetic mounting brackets, extension rods and chains
- 3-D live view enables 3-D rotation of the virtual motor to correspond with the actual machine position
- Measurement values are averaged over time to provide accuracy in presence of vibration or other external disturbances
- Is supplied in a sturdy SKF carrying case
- Extensive range of accessories is available
|
|
|
|
