|
|
|
|
|
|
Hilti Concrete Auto Set Tool
|
|
|
Features - Drilling and setting with one tool
- Proper installation every time
- Up to 50% faster than the traditional method
- Built-in setting tool eliminates the need for a hammer
- Holes always drilled to the correct depth
|
|
|
|
|
|
|
|
|
|
SDS Bit
|
|
|
Spline Hammer Drill Bits• Carbide tip: Single carbide tip or cross tip• H flute• Surface treatment: shot-peening• Brazing process: Vacuum brazing• Application: masonry, concrete, stone, concrete etc.• Shank type: spline
|
|
|
|
|
|
|
|
|
|
Magnetic Nut Setter
|
|
|
QUICKLY SET NUTS: 1/4" magnetic hex shank nut setter set can be used with an impact driver or common power drills TIME-SAVING MAGNETIC DESIGN: Powerful magnetic design picks up nuts and bolts so you can position them quickly CHROME-VANADIUM STEEL: Heavy duty construction
|
|
|
|
|
|
|
|
|
|
Stepped Drill Bit
|
|
|
12-Step High Speed Steel 3/8-inch Step Drill Bit, 1/16-inch Steps (3/16- to 7/8-inch) & 5 Step 1/8-inch Steps (7/8" to 1 3/8") Save time by eliminating the need to change drills when drilling round holes in thin materials. Each smaller size drill also acts as a pilot for the next size. Made from industrial-grade high-speed molybdenum steel heat treated for maximum durability. Ideal for drilling holes into thin materials such as stainless steel, copper, brass, aluminum, plastic and laminates. SpeedPoint tip penetrates faster than previous Unibits and prevents walking. Non-skid tip does away with the need for center punches; 3-faltted hex shank prevents slipping in drill chuck. Drill diameters etched in flute for easy identification. Backed by a full lifetime warranty.
|
|
|
|
|
|
|
|
|
|
Demolition Chisel Bit-SDS Plus
|
|
|
R-Tec point reflects the hammer's energy back into the work material Increased rate of removal by 15% The result is faster demolition which increases overall jobsite productivity and profitability SDS-Plus hammer steel chisel for for masonry/concrete demolition
|
|
|
|
|
|
|
|
|
|
Demolition Chisel Bit-SDS MAX
|
|
|
SDS Max Shank takes care of light chipping and chiseling of tile, mortar, glazing compounds, and other masonry materials. This versatile SDS bit is built to last. Its hardened steel construction provides maximum durability for a longer bit life.
|
|
|
|
|
|
|
|
|
|
Replacement Milwaukee Dust Extractor Brush (Non-Stock)
|
|
|
Replacement Brushes for use with M12 HAMMERVAC 2306-20, 2306-22 and NEW 2712-DE and 2715-DE
|
|
|
|
|
|
|
|
|
|
#2 Phillips Screwgun Bit
|
|
|
Drives up to 10 times more screws than standard screwdriver bits Universal 1/4-Inch hex shank for use with any magnetic bit holder No.2 Phillips drywall bits
|
|
|
|
|
|
|
|
|
|
1/4" Pilot Bit-for Hole Saws
|
|
|
3.25-Inch Pilot Drill Bit for Hole Saw Arbors is a black oxide 1/4-Inch Diameter Drill bit with a 135-degree split point tip, designed to get the hole started quickly and accurately. This pilot bit allows you to line up the hole saw and guide it through the material you are cutting. The pilot drill bit works with most hole saw arbors and hole saws. It is designed to work with metal and wood.
|
|
|
|
|
|
|
|
|
|
Screwgun Quick Change Magnetic Holder
|
|
|
Shock-resistant tool steel for maximum durability Extra-strength magnet for superior bit retention Heat-treated; resists breakage and wear 1/2" Diameter, 2 7/8" long
|
|
|
|
