|
|
|
|
|
|
Hilti Concrete Auto Set Tool
|
|
|
Features - Drilling and setting with one tool
- Proper installation every time
- Up to 50% faster than the traditional method
- Built-in setting tool eliminates the need for a hammer
- Holes always drilled to the correct depth
|
|
|
|
|
|
|
|
|
|
Dry Core Bit
|
|
|
Very high quality diamond and longer coring lifeAir slots in the but tube to keep it coolNot all types of brick or block can be drilled-please consult factory9" drilling depth and 5/8"-11 hubJacobs Chuck adapter available for hand help rotary drills
|
|
|
|
|
|
|
|
|
|
Wet Core Bit
|
|
|
Heavy Duty Orange gives excellent footage and drilling speed. Designed for applications with light to moderate steel. Heavy Duty Orange is the best bit in the industry.
|
|
|
|
|
|
|
|
|
|
Recharge Batteries
|
|
|
High-capacity rechargable batteries have 40% more run time than standard batteries
|
|
|
|
|
|
|
|
|
|
Hole Saw Arbor
|
|
|
Hardened carbon steel for strength through the cross-section.Split point pilot drill for faster penetration and less walking.Check for Hole Saw size needed.3/8" shank for drill
|
|
|
|
|
|
|
|
|
|
Hole Saws
|
|
|
Product Description Bi-Metal Hole Saws, Supports heavy duty cutting with its rugged constitution, which is constructed on tough metal. It cuts faster, smoother without as much vibration as the others due to its variable pitch teeth. |
|
|
|
|
|
|
|
|
|
SDS Bit
|
|
|
Spline Hammer Drill Bits• Carbide tip: Single carbide tip or cross tip• H flute• Surface treatment: shot-peening• Brazing process: Vacuum brazing• Application: masonry, concrete, stone, concrete etc.• Shank type: spline
|
|
|
|
|
|
|
|
|
|
Clean Seal Plugs
|
|
|
Designed for stack testing of drain, waste, and vent plumbing systems, Clean-Seal® plugs thread into a standard test tee. The bladder is inflated and then water is introduced into the pipe. Upon test completion, deflate the bladder; water travels down the pipe, eliminating test water backsplash.
Features:
• Works in both plastic and cast-iron test tees
• Natural rubber body provides a leak-free seal
• High-impact ABS threads for maximum durability
• Removable/replaceable tire inflation valve fitting
|
|
|
|
|
|
|
|
|
|
Gripper (Dollar) Plug
|
|
|
Cherne's Gripper plugs can be used in a variety of applications including DWV (drain, waste and vent) testing and stack testing. End-of-Pipe design won't fall in, whereas the Inside-of-Pipe design allows you to locate the plug inside the pipe as far as you need. Time tested, the Gripper® remains one of the most popular mechanical plugs on the market.
Original Gripper® Plug Features:
• Ideal for sewer testing and long-term applications
• Made with glass-reinforced ABS plastic
• End-of-pipe design seals only at the end of a pipe
• Inside-of-pipe design seals inside pipe as far as needed
Equipped with:
• Easy to install extra large zinc wing nut – won't rust
• Natural rubber o-ring
• Galvanized carriage bolt to prevent corrosion
|
|
|
|
|
|
|
|
|
|
Test ball Plug
|
|
|
|
|
|
|
